UKPassats

Strange.

Mr Gaz.

How well do the center caps fit?

I bought some supposedly correct fitment but the rattle and are loose.
Part No. 3B7601171

Thank you.
Yeah suppose so.
Still strange.

Help.

Monte Carlos on VWPasst 03 4Motion.

Mtec 15mm spacer front.
Mtec 20mm spacer rear.
45 and 50mm bolts front rear.

Fronts locked bolts too long.

Any ideas folks?

Anyone fitted reverse sensors without the under bumper sensor thing?

Are the bumpers like the early B5.5 with the marking for sensors?

Spigot Bearing?

The video refuses to play.

Second battery for jump starting other vehicle.

And just a back up.

Guys is it possible to run a split charge relay system fo 2 110 no leisure batteries?

Want to run 2 batteries on my wagon.

So question is can I but an off the self split charge system and just add second battery in the back in a battery box?

Here's a few things I tried and sometimes worked to get the door unlocked. Start engine and lock and unlock from drivers door button on the drivers window switch panel. The extra current from when running worked several times. While trying to unlock put pressure on outside of door near handle area, ...

1 gasket that has 2 parts, new they are joined.

J&R boots and outer joints no problems after 30K.

Bill T2000 is the map wizard.
FWD 4Motion and Auto are different I believe.

Replaced with ebay engine.

The oil pressure switch pin was bent, the ECU only tells you to stop when revs reach a certain RPM. Stupid idea, I fitted a test gauge, multi fit kit from Amazon. Engine would be fubar, I had it sitting idling to get it up to temp for maybe 25 mins, no warning only at 3k RPM and above. https://www.a...

Oil pressure stop warning sorted.

Both oil pressure switches had bent pins, never noticed the damaged plug, quick cut and shut second hand plug aok.

Turns out it was a flat battery.
10.6 volts.
New battery sorted.

Thank you.

Do you need to remove steering wheel to fit cruise control stalk?

It's going.

Sorry for long wait. 4motion wagon. 1.9 TDI AVF. Everything works, but when I raise the revs over 3K I get a stop low oil pressure. So got out the remote mechanical gauge sorted a fitting and I have 5 bar at tick over at normal running temp, when I raise revs get a stop warning again with no oil pre...

I think it's an Audi thing from factory, but not switched on.

Motirdiag I have and registered, got an ebay cheapy 409 vag vcom cable but get a message I can't understand.

I'll do some screen grabs.

Thanks.
Thats what I used years ago VDS Pro.
No serial laptop, and would not work usb to serial or serial to pci card.

Have you tried getting them remade?

Pirtec?

Thanks. So where am I going wrong?
On my 02 sport I did it with a serial cable and a program I can't remember the name of, did it in dos just change 2 bytes and done.

Vcds says do it in cent elec.

Auto up down windows, am I in the wrong place?