UKPassats

Have a read at rosstech, as for what position I would say pushed in.

http://wiki.ross-tech.com/wiki/index.ph ... rake_(EPB)

No how-to on this one but I am more than happy to answer any questions. Parts list if needed: DRL + Signal LED Tube - Alibaba: https://b-deals.en.alibaba.com/?spm=a2700.details.shnsopsi9.1.4f279b584akNWX B6 Signal Housing - eBay: https://www.ebay.co.uk/itm/NEW-VW-PASSAT-B6-3C-CLEAR-FRONT-INDICATORS...

Hi

Need to find out bit of info regards airbag control module, working on car with blown airbags, from what I understand need to replace airbag module or send somewhere to reset it, but I come a cross some info that you can fit 2nd hand module as longest the codes matches? it that correct?

Thanks

Got a pressure test done yesterday and the rad has a pin hole in it. Waiting on a price to replace/ fit new rad but i was wondering is there something that can be put into the system that will seal the hole?? (Like radweld for the coolant system) Sent from my SM-G920F using Tapatalk Personally I wo...

Hi Smoky Managed to resolve the problem, it was indeed ther flap motor, half way through the opening and closing it was catching on part of a wiring harness which was hanging down, not enough to stop it completly but enough to cause a restiction that over time has worn the teeth down in the motor. ...

You can check your module number, if the last letter is E (I think is can't remember) or higher you be fine, radio is straight swap so no problem there, if you need to change a module anyone with vcds can do it.

Sent from my SM-G950F using Tapatalk

Sorry misread your post, did you check all fuses, there is couple of fuses that are for multifunciton control module in engine compartment, not sure if any of them actually related to door modules but worth a check. Very strange that you cleared the fault and the other things stopped working.

Hi

First of all first time I hear that coolant pump show fault code so I can't understand what error fault you cleared, you will need vcds to scan the car and report back.

Hi them paddles are std or custom, they look huge in that photo

No how-to on this one but I am more than happy to answer any questions. Parts list if needed: DRL + Signal LED Tube - Alibaba: https://b-deals.en.alibaba.com/?spm=a2700.details.shnsopsi9.1.4f279b584akNWX B6 Signal Housing - eBay: https://www.ebay.co.uk/itm/NEW-VW-PASSAT-B6-3C-CLEAR-FRONT-INDICATORS...

All sorted it was simple thing, drl via fog lights if you choose NA option will only come on once you release handbrake.

Sent from my SM-G950F using Tapatalk

I have been trying to get them working again but still the same, arrgghh just don't know what to do anymore Sent from my SM-G950F using Tapatalk Did you copy the original code first as a backup? No, I was using long coding helper, and only changing the function for NA and fogs as drl, everything wo...

I have been trying to get them working again but still the same, arrgghh just don't know what to do anymore

Sent from my SM-G950F using Tapatalk

All sorted now but nearly walk out today, bear with me this wasn't down to chicken out or anything, after waiting nearly 3 hours for my appointment go called to doctor office, quick chat he had a look at my eye and said no a problem we get it out the rest of it. OK cool, out comes the drops and eye ...

Fog lights are little or no use at all in the fog. It's not like you can't be seen with just dipped beam on. For that reason I fitted LED bulbs to match the bi-xenons on my Amarok and wired them to main beam. Then don't shed any more light on the road, but I think they look good when flashed. In yo...

Do you have climatronic fitted in your model? if yes when you put your car in reverse you will hear flap moving to stop sucking air from outside so you don't get fumes from engine inside cab, your fan motor bearing can just be worn out like mine was, first it would squeal then rumbling sort of noise...

This option although available in the coding occasionally may not work for 2005 or 2006 cars. It is known for the ECU to fail to accept or write a new code first time out but does after a few tries. Original fog lights should be fitted as after market or non OE ones may not work for drl. If I recal...

I have been a bit bored today, and was looking to have the drl working via fog lights but for some reason the North America option is not working even when the coding is accepted, I did make sure that there is tick in drl via fog lights is well and still no lights via fog lights but the Scandinavian...

I recently had a cataract done and believe me, you won’t feel a thing. The thought of it is worse than the actual procedure, your eye will be so numb. Yeah I know what you mean, I couldn't feel the needle going in when they was removing that swarf but bloody some sort of spining tool going on eye i...

Need to keep mine for another 10 years then :hyst Is there anything else left to change on yours or is it even better then it left the factory [emoji14] Sent from my SM-G950F using Tapatalk Way better than it left the factory - parts changed include upgrade to AMC head, KMB balance shaft and 100mm ...

the amount of money I recently spent on that car I need to keep it for 2 more years to get the value out of it. :roll: Need to keep mine for another 10 years then :hyst Is there anything else left to change on yours or is it even better then it left the factory [emoji14] Sent from my SM-G950F using...

Gazwould wrote:You could DIY with a Dremel .

You do know how to chear someone up [emoji3]

In all honesty I don't fancy having something going bzzzz in my eye ffs

Sent from my SM-G950F using Tapatalk

This have odor elimator - - is that after she visited? [emoji23]

Sent from my SM-G950F using Tapatalk

Bit unusual question here, but had a bit metal swarf in my cornea, just had it removed but I need to go back tomorrow to eye clinic to have the rust ring buffed out, anyone had it done? It was bad just having needle pocked in my eye but now buffing needed is well ffs,.. Sent from my SM-G950F using T...

All done and ready for judgment day, only problem I come a cross 1 bolt on top mount, same place on each side snapped, new bolt fitted and all good, oh and had to cut of old drop links, can't complain 167k on original front shocks and they still had compression left just felt slow on return, the amo...