UKPassats

This weekend, weather permitting.

I just use a filter chain with a cloth wrapped round the housing, works a treat

2 stroke \m/ it works, it helps & I use it regularly, 500ml in a tank full of fuel. I struggled to work a way of getting it in the tank, funnels have a wide..... funnel? & the ones you get with a petrol can are ribbed :-o so hold the oil in for ages, I eventually got an empty 500ml coke bott...

when your out of range, fear not, hold it to your head blip unlock.... Hey presto the car unlocks! Try it next time your in ASDA carpark, you'll be amaaaaazed!

Coilovers are much thinner so there won't be a problem

Jack the offending side up and check the arms, mine was knocking from the top arms especially when you moved the wheel from left to right.

When car is cold & AC is on the tick over is lumpy, if you switch to econ it runs fine??

What could the problem be??

Mine is standard, I get approx 450 miles to £75, my driving is up down hills on A roads impressive remap though. Wanna do mine???

The tape I bought was 50mm wide, the hardest part was the trim in the C pillar, I tried to do it in one piece but was very difficult. Over the weekend I noticed that any joins have shrunk showing the chrome, this is why I'm plisti dippering it

Thanks for complement
There is room to tuck on the windows, the rest needs a steady hand.
Get insulation tape, I got 50mm wide stuff which was stretchy, a decent craft knife will help too

I'm gonna plasti dip cos I think it'll last betterer

got some insulation tape & had a go de-chroming What do ya think?? http://i1003.photobucket.com/albums/af159/123deacon/DSC_2126.jpg I got some satin black & spayed the grille, it was chrome but I think it suits it in black. http://i1003.photobucket.com/albums/af159/123deacon/DSC_2127.jpg Don...

I had 17s, they had flat spots & vibrated like biatch.
I would get them checked, even though the vibration has gone, they will still potentially cause damage to the rear running gear.

Just a quick one, did you strip the calipers or leave on the car & just tape up the important bits??

Got some wide black insulating tape, you may laugh but its £2 a roll which will do 10 cars
I know the corners on the c pillars might be difficult but I think it'll work, its sticky enough & stretchy.

I'll keep you posted & show the results.

30mm, come on get it slammed! ! Would be nice to have access to a ramp.
How does it ride?? Did you remember to reset the control arms

They are grey but one is damaged , chrome cracked. I'll look on flea bay for some as yhey need spraying

I've got a highline b5.5 with chrome strips in them, will the none highline strips fit, as I want to colour code without the chrome bits.

I've got matt blak wheels so now thinking of removing the chrome with black vinyl tape, has anyone done this & have some images, to see if I like the look??

Tomorrows world!! Crikey, were they talking about the invention of the calculator too!!

Sorry, I had to I'm in a sill Friday mood

I think if you got hid hard enough that your head made it to the engine you would be pretty stuffed I'm not sure a piece of plastic would help

There are two different types of coilover that I've come across, one uses a single threaded tube with "helper" springs which prevents dislocation of the main spring. The others are threaded into the body of the unit which determine the ride height the main spring is held in place by a thre...

Here is the thread I done, been on for 3 years now, no problems
viewtopic.php?f=3&t=22195&p=176103#p176103/

A video of what?? The sound is nice a bit like its got a back box on, you can hear the turbo more too & there is a nice sound ehen you lift off.

I've done mine, I fabricated an aluminium heat shield & mounted it in the stock locating holes.
I then mounted the plastic top cover to cover the filter, looks stock but sounds nice

This is what I'm looking into at the moment, I'm swaying to JOM, probably from venom (£175) unless anyone on knows of any better deals.