Thoughts on engine carbon cleaning!

Post all your non car related and general chat in here for us all to have a laugh about !- Topics will be moderated if out of hand/offensive !....

Moderators: water01, vwnutant, desertstorm

Post Reply
karl1991
Posts: 6
Joined: Mon Oct 05, 2015 11:02 pm
Passat model: 2.0 TDI B6 ESTAT

Thoughts on engine carbon cleaning!

Post by karl1991 »

So engine management light came on and car keeps going into limp mode ran a diagnostic on it and it seems I got a problem with the vanes in my vgt with soot.

Here's the report:

Address 01: Engine (CBA)       Labels: 03L-906-022-CBA.clb 
   Part No SW: 03L 906 022 QC    HW: 03L 907 309 
   Component: R4 2,0L EDC G000SG  6208  
   Revision: 13H03---    Serial number: VWZCZ000000000 
   Coding: 0000072 
   Shop #: WSC 84736 922 534120 
   VCID: 76E5901F01080B91443-8023 

2 Faults Found 
009571 - Turbocharger Boost Control Position Sensor Circuit 
               P2563 - 000 - Implausible Signal - MIL ON 
             Freeze Frame: 
                    Fault Status: 11100000 
                    Fault Priority: 2 
                    Fault Frequency: 11 
                    Reset counter: 255 
                    Mileage: 186896 km 
                    Time Indication: 0 
                    Date: 2007.14.05 
                    Time: 11:57:03 

             Freeze Frame: 
                    RPM: 759 /min 
                    Speed: 2.0 km/h 
                    Voltage: 14.21 V 
                    Lambda: 45.8 % 
                    Lambda: -3.9 % 
                    Bin. Bits: 00001110 
                    Voltage: 2.584 V 

000665 - Boost Pressure Regulation 
               P0299 - 000 - Control Range Not Reached - Intermittent 
             Freeze Frame: 
                    Fault Status: 00100000 
                    Fault Priority: 2 
                    Fault Frequency: 2 
                    Reset counter: 255 
                    Mileage: 187745 km 
                    Time Indication: 0 
                    Date: 2007.14.11 
                    Time: 19:54:14 

             Freeze Frame: 
                    RPM: 2139 /min 
                    Speed: 110.0 km/h 
                    Load: 52.9 % 
                    Absolute Pres.: 2111.4 mbar 
                    Absolute Pres.: 1611.6 mbar 
                    Lambda: 100.2 % 
                    Lambda: 48.9 % 

Readiness: 1 1 0 0 0 

Anyone had carbon engine cleaning done on there car?

This topic has 3 replies

You must be a registered member and logged in to view the replies in this topic.


Register Login
 
Post Reply