How to control windows off your fob.

This Section is purely for HOW TO step by step guides , if you want to submit a thread please email admin or post it up and we will moderate it accordingly....these can be discussed in the other relevant forums . ALL THREADS WILL BE LOCKED

Moderators: desertstorm, vwnutant, water01

Locked
User avatar
desertstorm
Site Admin
Posts: 10303
Joined: Thu Apr 19, 2007 9:11 pm
Passat model: B5.5 130 TDI AWX
Location: Cannock

How to control windows off your fob.

Post by desertstorm »

Before you follow this process understand that you are rewriting the code of the EEPROM in the CCM and always check twice what memory locations you are changing and what the values are in those locations.
You should only change those memory locations described with the values mentioned. Do not deviate from this and you should be OK. If you are in any doubt then don’t do this. I take no responsibility for this process, I have garnered most of the following information from several sites on the internet and performed this mod successfully on my 2002 estate.

To do this mod you need a laptop with a serial connection, or a long serial extension cable from your desktop PC, a copy of VDC PRO which is linked to here, when you click on the download link scroll to the bottom of the page and click on the free button, This will take you to another page where you will have to wait 60 seconds before the download button appears.
http://rapidshare.de/files/45379732/VDC ... e.zip.html
and a serial version of the VAG-COM cable.

This won’t work with a USB VAG-COM lead because VDC PRO is a DOS program that boots up without starting windows so there will be no drivers running.

After you have downloaded the Zipped program unzip it and you will have a program called image.ISO. Burn the .ISO to a CD, you can download a very good free program to do this here
http://www.softpedia.com/get/CD-DVD-Too ... Burn.shtml

You now have a bootable CD from which you will be able to run the program.
Insert the CD in the CD drive and reboot the laptop/ PC, You have to get the laptop to boot from the CD drive to run the program, If your laptop/PC does not boot from the CD drive before the C drive then it will just fire up windows as normal. You need to change the boot order, On my Toshiba Satellite this can be done by pressing F2 during the bootup process. You may have to change the boot order in the BIOS.

When the Laptop boots you are presented with a DOS window, on my laptop you get a DOS prompt A:\>, at that type dir. You should see a list of various programs to run from the root directory at the bottom you should have a program called VAG which has a BAT file extension.
Type VAG at the prompt and enter, The program VDS-PRO should fire up.

From the menu you can configure the baudrate to fixed 9600 by pressing ALT and F together then ALT and C to select connect and selecting Fixed and 9600 Bd using the ALT F and the cursor up / down buttons to toggle the speed. To exit a menu at any point without changes press ESC.

It is best if your laptop has a fully charged battery or is running on mains / 12V off the car, you don’t want the battery going flat during mid programming.

Use the following procedure to reprogram the module, The following uses the values that I used to change my CCM on a 2002 Estate.

1. Turn ignition on (Do not start car)
2. Connect to central convenience (46), just type 46 on the main screen.
Image

3. Start login procedure (11), again type 11
4. Use the code 19283
5. When you have logged into the CCM you can see the module type in the bottom left hand corner mine was a C0959799B.Image
If you look at the bottom of this how to page you will see various modules for saloons and estates also for other VAG cars I haven’t tried these but I think there is a very good chance they will work.

6. Read serial eeprom (26), type 26
Image
Check memory locations:
04361
04362
04363

They should show up with 2 lines of values just look at the 1st value on the dec04361 line it should read 75

for all 3 memory locations the 1st value should be 75
(In the picture it shows 67 that is because it was already written)

6. write serial eeprom (27)
Image
you then type in the 3 memory address again:
04361
04362
04363

and put the new value as 67
(in the picture both values are 67 as I was writing 67 when it was already 67)
Image
You can now read serial eeprom (26) again to check that the memory address values have been changed correctly.

7. end output (06)

close and exit program disconnect from car.

Now exit your car and lock it. When you now open your car with the keyfob and hold the button the windows should start to roll down and stop when you lift your finger. Also when you lock the car now and hold the button down the windows will go up (close) until you lift your finger off the button...

And hey presto you hopefully have remote windows!!!


1J0 959 799 AH (any index) and 1J0 959 799 S 03B
Memory Address / old value / new value
04283 / 8 / 2
04289 / 8 / 2
08628 / 242 / 246 driver side front window
12724 / 250 / 254 passenger side front window
16820 / 250 / 254 driver side rear window
20916 / 242 / 246 passenger side rear window

1J0 959 799 J 00E
Memory Address / old value / new value
04286 / 8 / 2
04291 / 8 / 2
04296 / 8 / 2
08628 / 242 / 246 driver side front window
12724 / 250 / 254 passenger side front window
16820 / 250 / 254 driver side rear window
20916 / 242 / 246 passenger side rear window

1C0 959 799 A (any index) and 1C0 959 799 B (any index) for Variant/Wagon
Memory Address / old value / new value
04361 / 75 / 67
04362 / 75 / 67
04363 / 75 / 67

1C0 959 799 A (any index) and 1C0 959 799 B (any index) for Limousine/Sedan
Memory Address / old value / new value
04361 / 74 / 66
04362 / 74 / 66
04363 / 74 / 66

1J0 959 799 S 03B
Memory Address old value new value
04283 8 2
04289 8 2
08628 242 246 driver side front window
12724 250 254 passenger side front window
16820 250 254 driver side rear window
20916 242 246 passenger side rear window


1J0 959 799 AH 046 Sedan
Memory Address old value new value
04295*** 138 / 64
04283 138 / 64
04289 138 / 2
08628 242 / 246
12724 250 / 254
16820 242 / 246
20916 250 / 254

1J0 959 799 AH 06Q Sedan
Memory Address old value new value
04295*** 72 / 64
04283 72 / 64
04289 72 / 2
08628 242 / 244
12724 250 / 252
16820 242 / 244
20916 250 / 252

***This memory address added to keep the rear trunk handle from locking the car

1C0 959 799 C (2002 Golf)
Memory Address old value new value
04361 138 66
04362 138 66
04363 138 66

1C0 959 799 C (2004 Golf GLS TDI)
Memory Address old value new value
04361 138 130
04362 138 130
04363 138 no change

1C0 959 799 F or 1C0 959 799 G
Memory Address old value new value
04361 202 194
04362 202 194
04363 202 194

B5 Passat
________________________________________
1J0 959 799AJ
Memory Address old value new value
04283 138 2
04289 138 2
08628 242 246 driver side front window
12724 250 254 passenger side front window
16820 242 246 driver side rear window
20916 250 254 passenger side rear window

1J0 959 799 S 03B
Memory Address old value new value
04283 8 2
04289 8 2
08628 242 246 driver side front window
12724 250 254 passenger side front window
16820 250 254 driver side rear window
20916 242 246 passenger side rear window

1J0 959 799 J 00E
Memory Address old value new value
04286 8 2
04291 8 2
04296 8 2
08628 242 246 driver side front window
12724 250 254 passenger side front window
16820 250 254 driver side rear window
20916 242 246 passenger side rear window

B5.5 Passat
________________________________________
1C0 959 799 A or B (Wagon)
Memory Address old value new value
04361 75 67
04362 75 67
04363 75 67

1C0 959 799 A or B (Sedan)
Memory Address old value new value
04361 74 66
04362 74 66
04363 74 66

1C0 959 799 C (Wagon)
Memory Address old value new value
04361 203 195
04362 203 195
04363 203 195

1C0 959 799 C (Sedan)
Memory Address old value new value
04361 202 194
04362 202 194
04363 202 194

New Beetle
________________________________________
1J0 959 799AJ
Memory Address / old value / new value
04283 / 138 / 2
04289 / 138 / 2
08628 / 242 / 246 driver side front window
12724 / 250 / 254 passenger side front window

1C0 959 799 F or G
Memory Address / old value / new value
04361 / 202 / 194
04362 / 202 / 194
04363 / 202 / 194

Gti
________________________________________
1J0 959 799AJ
Memory Address old value new value
04283 138 2
04289 138 2
08628 242 246 driver side front window
12724 250 254 passenger side front window

Jetta Wagon
________________________________________
1C0 959 799 C (2003 Jetta Wagon TDI)
Memory Address old value new value
04361 202 194
04362 202 194
04363 202 194

Polo
________________________________________
6N0 959 799 B 07F
Memory Address old value new value
04283 10 2
04289 10 2
04295 10 2


If it doesn't work just put your old values back in there should be no harm done
Last edited by desertstorm on Fri Feb 20, 2009 11:25 am, edited 5 times in total.
Gone but will never be forgotten
207Bhp 347Lb/ft 14.9 seconds 93mph
The build topic viewtopic.php?f=5&t=56110

Image
The new 382bhp Audi viewtopic.php?f=5&t=70765

This topic has 4 replies

You must be a registered member and logged in to view the replies in this topic.


Register Login
 
Locked