![wink ;)](./images/smilies/icon_e_wink.gif)
I have checked the switch and there is not any 12 volt voltage there, nor at the adjacent switch. I opened up the side trims to gain access to the release mechanism for the flap, and as expected no voltage there either. So I disconnected the linkage so I can open the flap manually if I need fuel.
![Wink :wink:](./images/smilies/icon_wink.gif)
On looking through Haynes manual, it seems that both the air/con and the two switches in the door emanate from a ‘Courtesy’ module but being a simple mortal I do not know any more about the problem.
![I dont know :-??](./images/smilies/106.gif)
Query 1, if it is that module, where is it located and is it a simple job just to swop it with another that will work
Query 2 are they expensive and by how much.
Any would be appreciated,
Bill