Hi All,
i have just moved into passat ownership after many years of VW cars (just sold my T5) hopefully someone can shed some light/help me out on this issue
58 plate passat sport
2.0tdi
Saloon
auto hold feature
I have had a few occasions now where the EPB has come up with a fault flashing up on the screen. 3 times this has been when i want to park up, push the button, says there is a fault and wont put the parking brake on. I turn the car off & on again and it seems to work fine again. This morning after being parked up all night i went to leave pushed the button and it said there was a fault again turn on off 2 times and it works fine!!
I have purchased a new switch to replace the old one as i am hoping it is just a faulty switch (awaiting delivery of the switch now!) hopefully this wont be an expensive caliper fix!
I have done a scan and this was the faults listed for the parking brake
Address 53: Parking Brake Labels: 5N0-907-801.clb
Part No SW: 3C8 907 801 A HW: 3C8 907 801 A
Component: J540 EPB3 VW-10498 0003
Revision: 009 Serial number: 00000000097514
Coding: 0000057
Shop #: WSC 00028 028 00001
VCID: 285FA6FB9B84EE02C8-807C
5 Faults Found:
03200 - Switch for Electric Parking Brake (E538)
012 - Electrical Fault in Circuit - Intermittent
Freeze Frame:
Fault Status: 00111100
Fault Priority: 1
Fault Frequency: 30
Reset counter: 14
Mileage: 187885 km
Time Indication: 0
Freeze Frame:
Voltage: 11.30 V
Count: 10
Speed: 0.0 km/h
Hex Value: 0x12F1
Hex Value: 0x0001
Hex Value: 0x1010
02434 - Supply Voltage for Control Module for Left Channel
009 - Open or Short to Ground - Intermittent
Freeze Frame:
Fault Status: 00101001
Fault Priority: 2
Fault Frequency: 2
Reset counter: 3
Mileage: 197057 km
Time Indication: 0
Freeze Frame:
Voltage: 13.80 V
Count: 16
Speed: 0.0 km/h
Hex Value: 0x12F0
Hex Value: 0x0001
Hex Value: 0x0101
16366 - Control Module - Internal Malfunction; CPU 2
014 - Defective - Intermittent
Freeze Frame:
Fault Status: 00101110
Fault Priority: 1
Fault Frequency: 27
Reset counter: 3
Mileage: 187885 km
Time Indication: 0
Freeze Frame:
Voltage: 11.30 V
Count: 41
Speed: 0.0 km/h
Hex Value: 0x12F0
Hex Value: 0x0021
Hex Value: 0x1010
16352 - Control Module - Electrical Error
014 - Defective - Intermittent
Freeze Frame:
Fault Status: 00101110
Fault Priority: 1
Fault Frequency: 34
Reset counter: 14
Mileage: 187885 km
Time Indication: 0
Freeze Frame:
Voltage: 11.30 V
Count: 42
Speed: 0.0 km/h
Hex Value: 0x12F1
Hex Value: 0x0001
Hex Value: 0x1010
00446 - Function Limitation due to Under-Voltage
002 - Lower Limit Exceeded - Intermittent
Freeze Frame:
Fault Status: 00100010
Fault Priority: 1
Fault Frequency: 3
Reset counter: 248
Mileage: 196201 km
Time Indication: 0
Freeze Frame:
Voltage: 13.90 V
Count: 52
Speed: 0.0 km/h
Hex Value: 0x12F0
Hex Value: 0x0001
Hex Value: 0x0404
Can anyone help me? would it be best to clear these faults fit the new switch and see what happens?
Cheers
loz
EPB intermittent fault help undersatanding vcds code
Moderators: water01, vwnutant, desertstorm