UKPassats

What rac warranty do you have? Im surprised the haldex ecu is covered aswell, got myself a 4mo aswell so might just see what warranty they offer....

The actual removing and fitting of new parts is believe it or not very easy, it just the costs of all the new bits and then you will need to code the new bits, but you will have stock equipment at the end of the day.

If you are keeping the car, then you can also look at upgrading the builtin bt module. I was in same situation as you, premium bt installed, red clocks, multifunction steering wheel, pop out keypad BUT wouldnt pair with my Lumia So I bought: new white clocks £55 trim £30 (from germany) convertor f...

If you know for sure its the dvd drive, buy a replacement of ebay and swop it out. Its about £100 for a replacement drive, mine was gone, the drive that is, and I swopped it for a new one, takes about 45mins with removing the rns unit, removing trim and swopping drive.

The first set, brabus 3 spoke look like they belong on the delorean!

I personally prefer the phaeton ones.

For me it will be

Could also be a case that the miles to service haven't been done yet but the time has, so it if says 3k miles to next service or 10 days. you obviously haven't done 3k miles but you may have driven it for 10 days...just a thought...btw the 10 days is just an example Mines like that, every 365 days, ...

RichardSEL wrote:
Erm, you did buy clocks with mileage zeroed or very close to zero didn't you?

Nope, but I can get them corrected to what my mileage is, i'll stick to the convertor cabley thingy

HOLY poo BATMAN!

aint paying that much for it, talk about markup!

Sweet!, now need to try and find someone uk'ish selling it, apparently 20 - 30 days delivery time!! Cheers mate :D ^:)^ Im about as useful with a soldering iron as a chocolate teapot, the convertor it is for me :D Im curious, why a pita? buy convertor, buy clocks and job a good un? or is there more ...

Ok, so removed my current red clocks and the connector for them is as below: http://i64.tinypic.com/ayalmv.jpg And heres the connector for the new (white) clocks http://i63.tinypic.com/2q81shw.jpg the bloody connectors are completely different!!! Heres the location of the connector in the dash http:...

Cheers for that bud, I might just buy the ebay version and see how I go

poo! Thought it seemed a bit too simple as just a software upgrade, hey ho never mind, lets see what dealers have to say. Soooooo if worse case scenario, and they say nope sorry cant do anything heres the price of a new module, would the following ebay item work? obviously after coding it all, been ...

Control Part Number: 3C8 907 801 A HW: 3C8 907 801 A Component and/or version: 7540 EPB3 VW-10498 003 Software Coding: 0000057 Spoke to my local (I'm from Bradford work it out) main dealer and they simply refused to update the firmware saying if faulty we swop out only, plus a £90 charge for diagno...

Hi All.

I have the same fault code as above.

Is it still the case of getting the dealers to flash new firmware onto the epb module? or has the tpi been superseded? Is the flash foc?


Thanks

Muchos gracios amigo! I'm gonna mail him the link, he should have something like that, he did my timing belt and said he used a locking pin/kit

But better to ask than go into something eyes wide shut

er, o ring? clip?

If its not in the parts dmitch listed then no...

got a part number for then?

Dmitch, Im buying the Kit 9 – KMB9– Audi / VW 2.0tdi Oil Pump Balance Shaft - Gear Driven, from KMB. Spoke to him and even though i said mine was a CR engine, he said this kit (which doesnt explicitly say CR engines) is what I need. getting the bolts from above, your part numbers, oil, oil filte...

Mine a 58 plate, engine code cbab 2.0 tdi

Anyone?

Im getting mine done aswell shortly so if anyone does have the part numbers, appreciated

Nope, because I have the drawer on the left hand side of the trim, and the trim in the link doesn't, thus is longer on the left hand side. Plus that's a 2012 trim the clocks are actually recessed into the trim in the ebay item, whereas mine and the cc trim up 2011 is flat only one ive found is http:...

This is what I currently have



Its in silver, so need the same thing but for white clocks

Ok, so finding the trim for white clocks is turning out to be heck of alot more painful that I imagined.

Does anyone already have the trim and the part number so I can at least check with dealers to see how much they are charging? Need it in standard grey

Can find b7 trim which wont fit

wes01 wrote:

Imran wrote:I'm looking for any of the below:

3C8 035 730 a/b/c/d/e

or

5N0 035 730 c/d

Loads on eBay, does yours have the red instruments?

Eh, I've been checking every day, not what I want are listed, there is one 5n0 035 730 but again not the one Ä« want