Search found 510 matches
- Fri Apr 21, 2017 7:01 pm
- Forum: GENERAL CHAT
- Topic: Time to go
- Replies: 5
- Views: 2652
Re: Time to go
Hopefully may of found a replacement so mine will be going,might see if anyone wants it on here or stick it on the bay. Will see what happens.
- Tue Feb 28, 2017 7:52 pm
- Forum: B5 & B5.5 PASSATS
- Topic: B5 1.8t vag com readings
- Replies: 11
- Views: 2800
Re: B5 1.8t vag com readings
Ok will have a look,just went to see if any codes had come up there were none,but lambda reading at idle is -3.1 is that good?
- Tue Feb 28, 2017 5:13 pm
- Forum: B5 & B5.5 PASSATS
- Topic: B5 1.8t vag com readings
- Replies: 11
- Views: 2800
Re: B5 1.8t vag com readings
Oh right seems a right ball ache to do am beginning to loose interest in the car
- Mon Feb 27, 2017 9:10 pm
- Forum: B5 & B5.5 PASSATS
- Topic: B5 1.8t vag com readings
- Replies: 11
- Views: 2800
Re: B5 1.8t vag com readings
Still work in progress throttle body is clean and realigned with ignition on and wait til sound stops from the alignment. No vac leaks but haven't checked injectors or seals yet although it does look a touch moist where they sit so maybe that's my issue. Is it a easy job and if that is the case wher...
- Sat Feb 18, 2017 8:40 am
- Forum: B5 & B5.5 PASSATS
- Topic: B5 1.8t vag com readings
- Replies: 11
- Views: 2800
Re: B5 1.8t vag com readings
Cheers for the reply 225 is a bit much for the k03 isn't it
- Fri Feb 17, 2017 8:03 pm
- Forum: B5 & B5.5 PASSATS
- Topic: B5 1.8t vag com readings
- Replies: 11
- Views: 2800
B5 1.8t vag com readings
Hi all just used vagcom to see if I had any codes which I didnt :esm However I checked the maf reading at idle and noticed the rpm was fluctuating between 760 and 850 also the g/s was fluctuating between 2.34 to 3.16,is this normal,i believe its in range but should both values be stable? Also did a ...
- Tue Feb 07, 2017 10:37 am
- Forum: B5 & B5.5 PASSATS
- Topic: B5 black plastic hose
- Replies: 2
- Views: 1156
Re: B5 black plastic hose
Cheers for that yep that's the one.
- Sun Feb 05, 2017 5:42 pm
- Forum: B5 & B5.5 PASSATS
- Topic: B5 black plastic hose
- Replies: 2
- Views: 1156
B5 black plastic hose
Hi all b5 1.8t there is a L shaped hose that connects on the top corner of the inlet manifold which in turn connects to a plastic hose with two outlets. It is the plastic hose that needs replacing as it is leaking. Does anyone have a part number and is there an o ring in the hose. Cheers
- Sun Jan 22, 2017 12:35 pm
- Forum: B5 & B5.5 PASSATS
- Topic: B5 1.8t hesitation at 3000 revs
- Replies: 10
- Views: 2652
Re: B5 1.8t hesitation at 3000 revs
Thanks for your replies chaps it's all fixed now,well need another part but temporary fixed it. Went to do my airfiilter and there is a thin black metal pipe that is clipped to the airbox so you have to undo it near intake pipe to get better access. As I moved it out of way noticed the other end whi...
- Fri Jan 20, 2017 7:56 pm
- Forum: B5 & B5.5 PASSATS
- Topic: B5 1.8t hesitation at 3000 revs
- Replies: 10
- Views: 2652
Re: B5 1.8t hesitation at 3000 revs
Supposed to say 2.64 at 800 rpm
- Fri Jan 20, 2017 7:55 pm
- Forum: B5 & B5.5 PASSATS
- Topic: B5 1.8t hesitation at 3000 revs
- Replies: 10
- Views: 2652
Re: B5 1.8t hesitation at 3000 revs
Ok will have a look. Just tried vcds lite on maf readings came up with 2.64 at 800 remember not sure what that means,then my laptop froze so I gave up lol. Does that reading sound ok?
- Thu Jan 19, 2017 7:57 pm
- Forum: B5 & B5.5 PASSATS
- Topic: B5 1.8t hesitation at 3000 revs
- Replies: 10
- Views: 2652
Re: B5 1.8t hesitation at 3000 revs
How do you disconnect the injectors do they just pull off,looks like there is a sort of double clamp thing on mine.
- Thu Jan 19, 2017 10:41 am
- Forum: B5 & B5.5 PASSATS
- Topic: B5 1.8t hesitation at 3000 revs
- Replies: 10
- Views: 2652
Re: B5 1.8t hesitation at 3000 revs
Any ideas I would test the coil read somewhere you can take them off with engine running to see which one is failing but don't want a electric shock
- Mon Jan 16, 2017 8:14 pm
- Forum: B5 & B5.5 PASSATS
- Topic: B5 1.8t hesitation at 3000 revs
- Replies: 10
- Views: 2652
B5 1.8t hesitation at 3000 revs
Hi all my 1999 B5 1.8t apu has started to hesitate around 3000 revs more so in 3rd 4th and 5th,it does stumble through then all is fine. Its been remapped by simon sponser from here a few years back and has been fine since then,up to a few weeks ago. Ive replaced plugs and oil still the same,stuck i...
- Sun Jan 15, 2017 1:22 pm
- Forum: GENERAL CHAT
- Topic: Time to go
- Replies: 5
- Views: 2652
Re: Time to go
Cheers chaps,well ive been looking at the Volvo v70 d5 but am a bit concerned as to what the new car tax for new cars will be in april this year. Obviously its only for new cars but there is talk of it effecting the older ones too so going to hold fire til then and go from there. Not only that but m...
- Fri Dec 02, 2016 9:39 pm
- Forum: GENERAL CHAT
- Topic: Time to go
- Replies: 5
- Views: 2652
Time to go
Think its time to leave the fold not sure if im going to part exchange or sell privately yet depends which I find easiest,havent found a replacement yet so will start looking early in the new year.
- Fri Dec 02, 2016 8:11 pm
- Forum: MEMBERS MOTORS AND MUGSHOTS
- Topic: camturbo
- Replies: 64
- Views: 2640
Re: camturbo
Not much to update,few small things to be repaired but I think the time may have come to part with the old girl and to leave the fold. Not sure whether to part exchange it or sell it privately depends what I think is easiest when I find the next motor.
- Tue May 17, 2016 11:18 am
- Forum: B5 & B5.5 PASSATS
- Topic: pcv system 1.8t 1999 apu
- Replies: 0
- Views: 866
pcv system 1.8t 1999 apu
Afternoon all ive noticed a oil/fume smell coming into the car,after further investigation ive noticed a large hole in one of the pcv plastic/rubber pipes under the inlet manifold. First of all, would this effect the performance side of things? Plus does anybody have a parts diagram of a 1999 1.8t A...
- Tue May 10, 2016 7:15 pm
- Forum: MEMBERS MOTORS AND MUGSHOTS
- Topic: camturbo
- Replies: 64
- Views: 2640
Re: camturbo
Wing mirror now fixed,along with window cable and also new pads and discs on the rear,bit of a mare doing them as the pads had worn down to the rivets and had started to eat the discs,bad maintanence on my part. All singing sweetly now,til the next problem occurs lol.
- Thu May 05, 2016 10:32 am
- Forum: Music
- Topic: Need help locating a album??
- Replies: 8
- Views: 17136
Re: Need help locating a album??
Still cant find this album I think that somewhere over the rainbow by marusha was the last trac,album must be out there somewhere?
- Wed Apr 13, 2016 4:06 pm
- Forum: GENERAL CHAT
- Topic: How many left?
- Replies: 9
- Views: 2749
Re: How many left?
Still drive my B5 1.8t its on 140000 now no rust at all and all up together.
- Thu Feb 25, 2016 12:15 pm
- Forum: B5 & B5.5 PASSATS
- Topic: inner plastic bit in door mirrors
- Replies: 8
- Views: 2384
Re: inner plastic bit in door mirrors
Thanks for the above replies,all fixed now took 30 mins,had to take off the mirror cap and the bottom piece to reveal just the motor part and replaced the glass at the same time. Sorted!!!
- Sat Feb 20, 2016 9:37 am
- Forum: B5 & B5.5 PASSATS
- Topic: window clamp
- Replies: 12
- Views: 2837
Re: window clamp
Hi all thanks for the above replies,its now fixed :esm The old cable had snapped in pieces and wrapped around the window mech,managed to force the window down just,to get access to the window clamp bolts. Not to hard a job bit fiddley though,had an issue putting the outside handle and lock back in b...
- Sat Feb 06, 2016 11:16 am
- Forum: MEMBERS MOTORS AND MUGSHOTS
- Topic: camturbo
- Replies: 64
- Views: 2640
Re: camturbo
Small update,in the process of fitting a new cable to the drivers side window but rain has stopped play for a while, also noticed that a bit of the wing mirror has broke which I must of done when I replaced the glass a while back. Hit one of the many potholes which seem to be everywhere which has pu...
- Fri Feb 05, 2016 5:49 pm
- Forum: B5 & B5.5 PASSATS
- Topic: inner plastic bit in door mirrors
- Replies: 8
- Views: 2384
Re: inner plastic bit in door mirrors
Cheers for the above poster thanks for the part numbers mate.