UKPassats

I bought the interior but I have found out it was from a syncro, so the rears have different mounting points, have swapped the covers on the rear backs , put the fronts in just the rear bases to go. Door cards needed a little bit of adjustment to get the fuel flap switch in but other than that was ...

stevegtx wrote:quality work as always matey is there much more noise with the back box gone and ive got to get some of those skoda vents i think

No more noise then normal really but you gain the cool owl sound.

Im trying to find a way of get a video of the sound

You need an old b5/b5.5 hazard switch and the connector for the skoda hazard switch. I had access to the skodab i got the vents off so i cut a good length of the hazard loom out http://www.cdgold.co.uk/polo-mk3/ukpassat/my_passat/Mods/skodavents/skodavents8.jpg I will post wiring pinout if i can fi...

You need an old b5/b5.5 hazard switch and the connector for the skoda hazard switch. I had access to the skodab i got the vents off so i cut a good length of the hazard loom out http://www.cdgold.co.uk/polo-mk3/ukpassat/my_passat/Mods/skodavents/skodavents8.jpg I will post wiring pinout if i can fin...

Iv used JR kits on a few cars and never had a problem, my corsa c has a full pass drive shaft as the inter boot was spirit and I was looking at 60 to 80 for the inter cv kit (including ECP) or the complete shaft from JR for 40 ish delivered, no brainer really There feedback is 100% and Iv hear there...

Here is the cone boot kit: 130693567327

Just a generic boot will do, I get the cv joint kits from ECP and had no issues. The time it takes the change the boot you may aswell fit a new cv joint as well. (Only if fooked) You can also pick up complete reconditioned/new drive shafts at not much more. I think there is also a cone kit that will...

I'm about to fit a set of these when they arrive. what with the 3 light clusters? is one headlight, one dipped and one side light? or do 2 light up when u use dipped headlight. looking at the unit u have an old style dipped light, a projector lense and a headlight with side light :-s thanks Just th...

gizmo-98 wrote:because that's were the plug/wiring is for the wing indicators?
rather than running wires through the wing tap into these ?

Could do I suppose

You will need to run indicators wires to each door.

You can tap into the side indicators in each wing or tap into the back of the hazard switch

Funny this topic popped you, mine started doing this last night with the alarm. But this will be my second rear motor [emoji20]

You need to try the how to section or search function.

I posted a topic about both inner and outer removel

The problem with ccm's is that they all have the same part number across the vw platform. Golf mk4/bora and many others have the same part number and the only way to be 100% is to use vag-com and read the software code or make sure its out of the same car as your. Passat Estate and saloon have diffe...

Cheers for the info. Both are estate though so they should be plug and play. Anybody confirm or deny that the wiring is the same? Thanks I have a b5 sports interior in my b5.5, strate fit but airbag connector is different on the base. So it may need changing over (chop it and resolder). Depends on ...

[quote="toonmania]I did wonder though if I bought the one with the paddles for the tiptronic box (seeing as I have one) how difficult it would be to wire them up to work :-[/quote] Yer it should easy to wire to work from the paddles. [emoji12] I think the most expensive part would be the new sl...

there is also 2x type for airbag but both will work

post-facelift


pre-facelift - 00-10 - 8N0 880 201

go for the tt mk2 one:

Bit like this? viewtopic.php?p=492581#p492581

Audi tt mk1 has the same steering column as the golf mk4/passat b5/b5.5

So yes it will fit and I think the airbag connector is the same

That is not good news :(,can you replace it with a new one,or just fix the one you got?,I always wanted an exhaust pipes like these,or maybe have a double exhaust :D,but not sure about the sound,don't want it to be noisy for me or for others,so have you noticed a major sound diff? I'm just going to...

Timon2210 wrote:I really like it very much,looks very nice from the back

Cheers, one thing I need to fix now is one of the parking sensor mounts.

With the old back box pipes cut (what I did) it's been firing the hot exhaust fumes at the parking sensor/mount and the mount fell off [emoji15]

To me "clocked" would be the what Holophyte said. It's been around the clock

Looking good ben, funny you should mention paul evans ive recently been talking to him alot over on the ford forums great guy. I havent yet been to check out his shop but he's advertising alot of fb. How does it sound losing the rear box? No difference really, little bit louder but the owl sound wh...

I'm in Teesside and can do it for a few beer token [emoji4]

I got my back box removed yesterday and just got a pipe though and I get the owl sound.

Thats with full cat and center box