Brake servo and Master Cylinder Change 2002
Posted: Mon Jan 26, 2009 6:28 pm
Hi Guys
Just done a servo and M/c change.
Cover removed
Inside
Lower panel removed
Pedal box
Wipers removed you need a puller to get them off and then remove the lower trim.
Suck the brake fluid out.
Remove the bolt that hold the take the res tank off
Unbolt the servo and M/c i undid the connection from the pedal without removing the fitting from the clip you can see the drain blocked!
Water damage to servo.
Water damage to M/c
New servo and M/c fitted
Refit all trim parts and wipers etc before a complete brake and clutch bleed
Inside all back together.
Dave
Just done a servo and M/c change.
Cover removed
Inside
Lower panel removed
Pedal box
Wipers removed you need a puller to get them off and then remove the lower trim.
Suck the brake fluid out.
Remove the bolt that hold the take the res tank off
Unbolt the servo and M/c i undid the connection from the pedal without removing the fitting from the clip you can see the drain blocked!
Water damage to servo.
Water damage to M/c
New servo and M/c fitted
Refit all trim parts and wipers etc before a complete brake and clutch bleed
Inside all back together.
Dave