Hi Guys
Just done a servo and M/c change.
Cover removed
Inside
Lower panel removed
Pedal box
Wipers removed you need a puller to get them off and then remove the lower trim.
Suck the brake fluid out.
Remove the bolt that hold the take the res tank off
Unbolt the servo and M/c i undid the connection from the pedal without removing the fitting from the clip you can see the drain blocked!
Water damage to servo.
Water damage to M/c
New servo and M/c fitted
Refit all trim parts and wipers etc before a complete brake and clutch bleed
Inside all back together.
Dave
Brake servo and Master Cylinder Change 2002
Moderators: water01, desertstorm, vwnutant
-
- UKPassat's Possie
- Posts: 5571
- Joined: Mon Aug 11, 2008 6:59 pm
- Passat model: 1.4 Tsi Golf
- Location: East Sussex
Brake servo and Master Cylinder Change 2002
Last edited by dave_1 on Mon Jan 26, 2009 11:45 pm, edited 1 time in total.
vag-Tacho 2.5 ,Vag-com , Sykes pickavant ACR4 , Elsawin ,ETKA, Key coding ,Servicing, Repairs,Autodata,Vivid,Damage free car opening in east sussex