Fitted hids
Posted: Sun Mar 05, 2017 9:48 am
I've fitted hids this weekend and am having issues with the beam, particularly in the left light. Ignore the fact that the light needs adjusting and I can't adjust it - I've ordered a replacement. The beam pattern on the left looks different to the right.
I've tired having the bar in the bulb sat on top and bottom.. I can't get them to look the same.
Couple of pics after messing with the lights. Again I know the left beam needs to go further left (adjuster not working)
![Image](http://i1143.photobucket.com/albums/n639/critical_mass08/Mobile%20Uploads/20170304_184314_zpsgunnk41q.jpg)
This is the best I could get it (if only the beam was slightly down and left)
![Image](http://i1143.photobucket.com/albums/n639/critical_mass08/Mobile%20Uploads/20170304_191528_zpsoakoc8pe.jpg)
Does that look or not?
I've tired having the bar in the bulb sat on top and bottom.. I can't get them to look the same.
Couple of pics after messing with the lights. Again I know the left beam needs to go further left (adjuster not working)
![Image](http://i1143.photobucket.com/albums/n639/critical_mass08/Mobile%20Uploads/20170304_184314_zpsgunnk41q.jpg)
This is the best I could get it (if only the beam was slightly down and left)
![Image](http://i1143.photobucket.com/albums/n639/critical_mass08/Mobile%20Uploads/20170304_191528_zpsoakoc8pe.jpg)
Does that look or not?