Hi all, long time forum ghost
I thought I'd share a little how to diy on fault code PO183 fuel temperature sensor. I found bits and pieces of information on the Internet for other vw's but nothing for the passat b7.
I used a xtool iobd2 dongle to find the fault and clear the codes.
The replacement sensor I sourced the bay of e.
I removed the engine cover and the sensor bottom left hand corner, unclipped the electrical connector and unscrewed the sensor with a rag under it as a little bit of fuel come out.
Screw in the new sensor by hand and reconnect the electrical connector.
And erase fault code with dongle.
I hope this little bit of info will help someone out.
Sent from my CLT-L09 using Tapatalk
PO183 fuel temperature sensor
Moderators: water01, vwnutant, desertstorm
PO183 fuel temperature sensor
Last edited by owerr1 on Thu May 28, 2020 8:12 pm, edited 1 time in total.