Help Vw Passat in goes in limp mode

something you need to ask , technical help here.

Moderators: water01, vwnutant, desertstorm

Post Reply
neo123
B1
Posts: 65
Joined: Sun Nov 22, 2015 1:04 am
Passat model: B6 2.0TDI CR

Help Vw Passat in goes in limp mode

Post by neo123 »

I was just getting onto the mortorway and getting up to speed, ca went into limp mode with the flashing glowplug light. I switch off the car and it the light went away, after the a while it did it again. Anyway i hooked it upto vcds and came up with this:

Address 01: Engine Labels: 03L-906-022-CBA.clb
Control Module Part Number: 03L 906 022 QD HW: 03L 907 309
Component and/or Version: R4 2,0L EDC G000AG 6209
Software Coding: 0000078
Work Shop Code: WSC 84224 536 599784
VCID: 77FB9D87064F96A6AA7-8022
1 Fault Found:

000665 - Boost Pressure Regulation
P0299 - 000 - Control Range Not Reached - MIL ON
Freeze Frame:
Fault Status: 11100000
Fault Priority: 2
Fault Frequency: 1
Reset counter: 255
Mileage: ***** km
Time Indication: 0
Date: 2003.14.27
Time: 17:05:60

Freeze Frame:
RPM: 2369 /min
Speed: 98.0 km/h
Load: 81.6 %
Absolute Pres.: 2346.0 mbar
Absolute Pres.: 1448.4 mbar
Lambda: 98.6 %
Lambda: 31.6 %


Readiness: 0 0 0 0 0

-_-----------------------------------------------------------------

Driving locally its never come up, but on steep hills it has been sluggish. Anyone have any suggestions.

This topic has 29 replies

You must be a registered member and logged in to view the replies in this topic.


Register Login
 
Post Reply