Pd170 issue...

something you need to ask , technical help here.

Moderators: vwnutant, desertstorm, water01

Post Reply
sisson
Too much time on your hands
Posts: 2670
Joined: Sun Sep 23, 2007 8:54 pm

Pd170 issue...

Post by sisson »

Hello all, back here again, this time in a Touran 170 sport



I know it's not a passat but it's the same BMN engine found in the 170's. just it's in a touran and there are no forums out there for them.



I'm having issues pulling off from a standstill, pull just clutch out with no revs and it is just about ok, knock it into 2nd again pull clutch out no revs and it kangaroos and stalls. It really hates pulling off in 2nd even at 10/15 mph. So driving in slow moving traffic is a nightmare

So at roundabouts I have to use 1st even if its still rolling?



It hates hill starts too, I literally have to rev it up to 2k revs otherwise it stalls?



Any ideas? It's had dpf removed and an upsolute map with an egr reducing blanking plate. Running around 210/215bhp.



Much appreciated all
Last edited by sisson on Fri Jul 05, 2013 5:24 am, edited 1 time in total.

This topic has 13 replies

You must be a registered member and logged in to view the replies in this topic.


Register Login
 
Post Reply